Previewing with Camera Tracking
When you are previewing a motion where the dummy character has to move a distance away from the original position,
the performed motion can sometimes extend beyond the camera.
In order to keep the character in view, the Camera Tracking feature is activated by default.
Camera Tracking = On (default). | Camera Tracking = Off. |
Similarly, the Camera Tracking feature is activated in CTA Motion LIVE 2D to keep track of the CTA character by default,
not moving off the screen during preview.
Camera Tracking = On (default). | Camera Tracking = Off. |
Resetting Camera in Motion Link
You may use the camera tools to pan, rotate or scale the dummy character in the Sending Motion mode to better observe the motion pose of the dummy character.
After manipulating the camera, you can click the Reset Camera button to focus the camera back to the dummy character at the specified projection angle in order to have a same viewing angle with the CTA character.
