Adjusting Fog

There are three parameters to set to create fog in your scene. After the Fog on box is activated, these three settings will be enabled.

• Fog Color: Pick a color for your fog. Different fogs can create different atmospheres.
  
  No fog
  
  Morning fog
  
  Smog
  
  Chemical Gas Leakage
• Distance Start: This value defines the distance from the camera to where the fog starts. Everything within this distance is clear without fog effect.
• Distance End value to decide the length from the camera that the fog ends.
  
  The Fog effect only takes place within the range defined by the Near and Far values.